Learning Center

2024 Ultimate Guide to Buying Speed Gate

Views : 3607
Update time : 2024-01-08 17:38:00

1. What Is A Speed Gate?
2. How Do Speed Gates Works?
3. How Much Does Speed Gate Cost?

4. Key Factors that You Must Consider When Buying Speed Gates
5. Where Can You Buy Speed Gates?
6. How to Install Speed Gates?
7. Key Benefits of Implementing Speed Gates in Your Facility
8. What maintenance do speed gates require, and how often should it be performed?

9. How are speed gates designed to prevent injuries to users, such as accidental entrapment?

What Is A Speed Gate?

A speed gate, also known as a speed lane, glass turnstile or swing gate, is a type of access control device that is designed to manage the flow of people traffic in and out of a particular area.

Speed gates are typically used in high-traffic areas such as airports, train stations, and office buildings to improve security and manage large crowds. Speed gates are characterized by their ability to allow only one person at a time to pass through, preventing unauthorized access and helping to maintain order. 

They come equipped with sensors that detect the presence of a person and can be configured in a variety of ways to suit the specific needs of different environments. 

With the growing emphasis on safety and security in public spaces, speed gates have become an increasingly popular way to control pedestrian traffic and ensure the safety of those inside.

How Do Speed Gates Works?

Speed gates are automated gates designed to control entry into restricted areas, such as offices, metro stations or airports. They work by using sensors to detect the presence of a person and then allowing access through the gate. 

There are several types of speed gates available, including flap speed gates, swing speed gates, and sliding speed gates. Flap speed gates have a pair of "arms" that swing open when a person approaches, allowing them to pass through. Swing speed gates work similarly but have a single "barrier" that swings open. Sliding speed gates have panels that slide to one side to allow access.


speed gate  speed gate speed gate

Most speed gates use an access control system to allow only authorized individuals to pass through. This can include a key card or other electronic access device that is scanned or swiped to activate the gate. 

Overall, speed gates are an effective way to control access to a restricted area while also providing a quick and convenient way for authorized individuals to enter and exit.

How Much Does Speed Gate Cost?

The cost of a speed gate varies widely depending on the specific product and its features. Some of the factors that can impact the price of a speed gate include the size, the materials, security level and access control  features incorporated, and the brand.

On the lower end of the price range, you can find basic speed gates for around $800-$2,000.However, high-end models with advanced security features and more sophisticated design can cost upwards of $5,000. It is important to carefully evaluate your needs and budget when considering the purchase of a speed gate to ensure that you are investing in a quality product that meets your requirements.

Key Factors that You Must Consider When Buying Speed Gates

When it comes to purchasing speed gates, there are a few key factors that you must consider to ensure you make the right choice. These factors include both the product quality and the level of service provided. 

Housing Material

Firstly, the quality of the speed gate's housing material is essential. Some manufacturers may choose to use 201 stainless steel instead of the higher-cost 304 stainless steel to reduce expenses when manufacturing casings. However, it's important to note that the corrosion resistance of 201 stainless steel is significantly inferior to that of 304 stainless steel. Macrosafe only uses 304 stainless steel or higher-quality and more expensive 316 stainless steel, which is specifically suitable for seaside areas, swimming pools, or chemical plants.  

Material Thickness

Secondly, the thickness of the housing is another crucial consideration. Thicker housing not only enhances the overall strength of the speed gate but also contributes to increased security. 
Macrosafe speed gates are constructed using a durable 2.0mm thick stainless steel material, which ensures a high level of strength and robustness. In contrast, some other manufacturers opt for thinner options, such as 1.5mm or even 1.2mm thick stainless steel, to reduce costs. 


The controller is another essential component of speed gates. It acts as the brain of the system and controls the movements of the gates.
Macrosafe prides itself on independent development and production of controllers that support a wide range of customizable functions. To ensure stable performance, Macrosafe utilizes high-quality STMicroelectronics chips. In contrast, many gate manufacturers lack in-house research and development teams and rely on outsourced motherboards with potentially unstable quality. This poses a potential inconvenience for customers in the event of after-sales issues, as they would need to contact the motherboard supplier separately, resulting in time wastage.

Infrared Sensor

High-quality infrared sensors guarantee the safety of users and minimize the risk of accidents or injuries. 
Macrosafe employs the use of the renowned PUBANG brand. However, it has come to our attention that certain manufacturers opt for lesser-known, low-cost brands to minimize production expenses. This approach may have adverse implications, as it not only compromises the protection of user's personal safety but also significantly amplifies after-sales maintenance costs.

Infrared SensorAnti-Panic

An anti-panic function is another factor to consider. In emergency situations, such as a fire alarm or power failure, the speed gates should have the ability to automatically open, allowing for the smooth and quick evacuation of people. This feature is vital in ensuring the safety and well-being of individuals in such circumstances.


Furthermore, compatibility with third-party systems is something to look out for. Many establishments already have existing security systems in place, such as access control, CCTV systems or walk through metal detector. Therefore, it is important to ensure that the speed gates you choose are compatible with these systems, allowing for easy integration and a comprehensive security setup.

Level of Service

Aside from product quality, the level of service provided should also be considered. Technical support is crucial, especially during installation and setup.
Macrosafe has a professional and experienced technical team that is fluent in English, ensuring seamless communication
and providing you with 24hours professional technical support. 

By considering these factors, you can make an informed decision and choose speed gates that meet your security needs effectively. 

Where Can You Buy Speed Gates?

Macrosafe is a leading manufacturer and exporter of high-quality speed gates and  turnstile gates for businesses across a range of industries. You can buy our speed gates directly from us by contacting our sales team or by submitting a request for a quote on our website. 

We are also represented by a network of authorized resellers and integrators worldwide, who can provide local support and installation services. To find an authorized reseller or integrator near you, please visit our website or contact us for assistance.

How to Install Speed Gates?

speed gate

Here is a quick guide on how to install a speed gate:

1. Prepare Tools--Before you begin installation, ensure that you have all the necessary tools and equipment, including the speed gate itself, screws, drill, and a spirit level.
2.Select Location--Begin by selecting the location where you want to install the speed gate. Consider the space available and ensure that there is enough room for the gate to open and close.
3.Select LocationLevel the Floor--Use the spirit level to ensure that the floor is level. If it is not level, you may need to make some adjustments before proceeding.
4.Drill holes--Use the drill to make holes in the floor where the speed gate will be installed. The number of holes will depend on the design of the gate.
5.Wiring--Dig out wire slots on the ground for wiring synchronization cables and power cables. (Refer to the manual for details)
6.Fix Speed Gates--Next, Fix the speed gates in place by screwing it into the floor. Ensure that it is level and secure.
7.Power Up & Test--Finally, connect the sync cables and power up the speed gate. Then you can test the speed gate to ensure that it opens and closes smoothly.

That's it! Your speed gate is now installed and ready for use.

Key Benefits of Implementing Speed Gates in Your Facility

Security has always been a top priority for businesses and organizations of all kinds. Business owners, managers, and decision-makers often ask themselves, “What can we do to better secure our facility and the people who visit and work in it?” Well, one option that should be seriously considered is speed gates. Speed gates are a highly effective security tool that can help improve overall facility security while also providing a number of other valuable benefits. In this article, we will look at some of the key benefits of implementing speed gates in your facility.s

1. Improved Security

Speed gates are designed to provide superior security by controlling access into and out of a facility. Only authorized personnel are allowed to pass through them, and they can be easily programmed to allow access only to specific individuals, based on their job title, security clearance, or any other criteria. This helps to reduce the risk of unauthorized entry and keeps your facility’s sensitive areas protected.

2. Increased Efficiency

Speed gates are designed to be highly efficient and can process a large number of people at any given time. They are quicker than traditional access control methods, such as manned security stations or turnstiles. They can handle up to 45-55 people per minute, which can be especially beneficial during busy periods.

3. Enhanced Visitor Experience

Speed gates can provide a positive experience for visitors to your facility. They are easy to use, and visitors can quickly and easily navigate through them without the need for additional staff assistance. This saves time and improves the overall visitor experience, leaving them with a positive impression of your business or organization.

4. Improved Monitoring and Reporting

Speed gates can also provide valuable monitoring and reporting capabilities. They can track who is entering and exiting your facility, how long they stay, and where they go while they are in your facility. This information can help you better understand how your facility is being used and make more informed decisions about how to allocate resources.

5. Customizable Design

Speed gates come in various designs and styles, and can be tailored to fit the specific needs of your facility. No matter you are looking for a sleek, modern design or a more traditional look and feel, speed gates can be customized to meet your requirements.

speed gate entrance control   office speed gate   speed gate for hotel access control   glass speed gate

Overall, speed gates provide an effective and efficient solution for securing your facility and controlling access to sensitive areas. They offer a range of benefits, including improved security, increased efficiency, enhanced visitor experience, improved monitoring and reporting, and customizable design. If you are looking for a way to improve your facility’s security, implementing speed gates should be a top consideration.

What maintenance do speed gates require, and how often should it be performed?

Like any mechanical system, speed gates require regular maintenance to ensure optimal performance and extend their lifespan.
speed gate
There are several maintenance tasks that should be performed regularly on speed gates. These include:

1. Cleaning the exterior surface of the speed gate: This should be done regularly to remove dirt, dust, and other debris from the speed gate's surface. This will help to reduce the risk of damage to the speed gate and keep it looking good.
2. Lubricating moving parts: The moving parts of the speed gate should be lubricated regularly to ensure smooth operation. This will help to prevent wear and tear on the components and extend the lifespan of the speed gate.
3. Checking the sensors: The sensors of the speed gate should be properly calibrated to ensure accurate detection of users. Any problems with the sensors should be identified and fixed promptly.
4. Reviewing the software: The software that controls the speed gate should be reviewed periodically to ensure that it is operating correctly and that all updates have been installed.

A maintenance schedule for speed gates should be established and followed according to the manufacturer's instructions. Maintenance should be performed more frequently in high-traffic areas or where the environment is particularly harsh and could cause damage to the unit. It is advisable to have a professional maintenance technician perform a thorough check at least twice a year. Regular and proper care will ensure the speed gate works optimally, provides reliable service for a longer period, and reduces the risk of malfunction or failure that could result in accidents or security breaches.


How are speed gates designed to prevent injuries to users, such as accidental entrapment?

Speed gates are designed to prevent injuries to users through several safety features. Here are some of the ways speed gates are engineered for user safety:

1. Anti-entrapment sensors: Speed gates have sensors that detect if a person is passing through the gate and will immediately stop moving if an obstruction is detected. This prevents accidental entrapment.

speed gate
2. Safety edges: Some speed gates are equipped with safety edges, which are bumpers that retract the gate when it encounters an object or person, and prevent the gate from crushing them.
3. Low-energy mode: When activated, some speed gates can operate at a slower speed, reducing the risk of injury in case of accidental entrapment.
4. Clearances: Speed gates are designed with specific clearance dimensions to ensure that users are not trapped or pinched upon entry or exit.
5. Safety warnings: Speed gates should display safety warnings and instructions for users to follow, such as not touching the gate while it is in operation.

By implementing these safety features, speed gates are designed to help prevent user injuries and provide a safe and efficient way to control access to secure areas.


More Articles

How much is a turnstile gate? | Best Buying Guide
What is the ESD access control system?

Top 5 Tripod Turnstiles in 2024 | Turnstile Buying Guide
Why turnstiles are perfect access control solutions for gyms?
TOP 5 Most Popular Flap Barrier Gates for Entrance Control
Compared with ordinary turnstiles, what are the advantages of glass turnstiles?
What are the types of half-height turnstiles?
Top 9 Benefits of Turnstile Barrier Gate for Your Business
8 Tips For Choosing Best Swing Barriers in 2024
Biometric Turnstile: A Beginner's Guide (2024)